| Sensing Mode (General) | Proximity |
| Sensing Mode (Detailed) | Time of Flight |
| Housing Style | Barrel - Straight |
| Primary Housing Material | ABS/Polycarbonate |
| Input/Output | Analog |
| Analog Output Configuration | 0-10 V dc |
| Analog Resolution/Discrete Repeatability | 2.5 ms response: 1mm; 30 ms response: 0.5mm |
| Max Sensing Distance (mm) | 300 |
| Minimum Sensing Distance (mm) | 30 |
| Power Supply | 12-30 V dc |
| Delay at Power-up (ms) | 300 |
| Temperature Effect (mm/°C) | 0.02% of sensing distance/°C |
| Connection | Cable |
| QD Type/Cable Length | 2 m |
| Analog Voltage Output Rating | 2.5 kΩ min. load impedance |
| Discrete (Switched) Outputs | Bipolar (NPN & PNP) |
| Output Protection | Protected against short circuit conditions |
| IP Rating | IP67 |
| NEMA Rating | NEMA 6P |
| Storage Temperature (°C) | -40 to 80 |
| Max Operating Temperature (°C) | 60 |
| Min Operating Temperature (°C) | -20 |
| Max Op. Relative Humidity Non-Condensing (%) | 100 |
| Warm-up Time (minutes) | 10 |
| Temperature Warm-up Drift upon Power-up | Temp. compensation enabled, < 1.0% of the sensing distance upon power-up. |
| Temp. Warm-up Drift (Notes 1) | After 30 min, the apparent switchpoint is < 0.5% of the actual position. |
| Temp. Warm-up Drift (Notes 2) | After 60 min, the apparent switchpoint is < 0.3% of the actual position. |
| Minimum Response Time (ms) | 2.5 |
| Rep Rate (ms) | 2.5 |
| Analog Linearity (mm) | +/- 0.5 |
| Barrel Diameter (mm) | 18 |
| Minimum Window Size (mm) | 5 |
| Remote Teach and Laser Control Input Impedence | 12 kΩ |
| Ultrasonic Frequency (kHz) | 300 |
| Power/Current Consumption (exclusive of load) | 65 mA max; 40 mA @ 25 V dc |
| Supply Protection Circuitry | Protected against reverse polarity and transient overvoltages |
